Supermicro AOC-XEH-IN2 Uživatelský manuál Strana 232

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 392
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 231
Superblade Network Modules User’s Manual
7-134
Virtual Interface
Clicking the VIRTUAL INTERFACE tab brings up the OSPF VIRTUAL INTERFACE
C
ONFIGURATION page (Figure 7-119). The parameters for this page are shown in
Table 7-93.
Designated Router This read-only field specifies the IP Address of the Designated Router.
Status
When this parameter is enabled, the interface is advertised as an internal
route to some area. When disabled it denotes that the interface is external
to OSPF.
Figure 7-119. OSPF Virtual Interface Configuration Page
Table 7-93. OSPF Virtual Interface Configuration Page Parameters
Parameter Description
Transit Area ID This parameter specifies the transit area that the virtual link traverses.
Neighbor Router ID This parameter specifies the router ID of the virtual neighbor.
Authentication Type
This parameter allows you to choose MD5, Simple Password or None as
the authentication type.
Table 7-92. OSPF Interface Configuration Page Parameters (Continued)
Parameter Description
Zobrazit stránku 231
1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 391 392

Komentáře k této Příručce

Žádné komentáře