
7-123
Chapter 7: 1/10-Gb Ethernet Switch Firmware
RIP
The RIP link opens the following links for configuration of RIP protocol:
• "RIP Basic Settings" on page 7-123
• "Interfaces" on page 7-124
• "Neighbors List" on page 7-125
• "Security Settings" on page 7-126
• "Address Summarization" on page 7-127
RIP Basic Settings
Clicking the BASIC SETTINGS tab brings up the RIP BASIC SETTINGS page (Figure 7-109).
The parameters for this page are shown in Table 7-84.
Figure 7-109. RIP Basic Settings Page
Table 7-84. RIP Basic Settings Page Parameters
Parameter Description
Output-delay
This parameter specifies the delay that needs to be enabled for RIP to split
the periodic update packets before they are sent out.
Neighbor Filter
This parameter enables or disables neighbor filtering. Neighbor filtering
helps you to filter routes from specific neighbors.
Auto-summary status This parameter enables or disables the Auto-summary feature.
Komentáře k této Příručce