
Superblade Network Modules User’s Manual
7-28
IP Extended ACL
Clicking the IP EXTENDED ACL tab brings up the IP EXTENDED ACL CONFIGURATION page
(Figure 7-23), which displays the various parameters required to configure the Extended
IP access lists. The parameters for this page are shown in Table 7-13.
Table 7-12. IP Standard ACL Configuration Page Parameters
Parameter Description
ACL Number
This parameter specifies the unique ID for the access list. This value must
be in the range from 1 to 1000.
Action
This parameter specifies whether the packets must be allowed or dropped
when a match has been found.
Source and Destination IP
Address
This parameter specifies the IP Address of the Source and Destination for
which the access list must be applied.
Subnet Mask
This parameter specifies the Source and Destination Address Mask
corresponding to the IP Address.
Ports List (Incoming)
This parameter specifies the Incoming Port List for which the access list
has to be applied.
Ports List (Outgoing)
This parameter specifies the Outgoing Port List for which the access list
has to be applied.
Figure 7-23. IP Extended ACL Page
Komentáře k této Příručce