Supermicro SYS-7046A-6 Uživatelský manuál stáhnout pdf (Strana 52)

5-20

SuperWorkstation 7046A-6 User's Manual

LAN1/LAN2 Enable/Disable

Change the setting of jumper JPL1 or

JPL2 to enable or disable the LAN1 and

LAN2 Ethernet ports, respectively. See

the table on the right for jumper set-

tings. The default setting is enabled.

LAN1/LAN2 Enable/Disable

Jumper Settings

Jumper Setting Deﬁ nition

Pins 1-2 Enabled

Pins 2-3 Disabled

Audio Enable/Disable

JPAC enables or disables the onboard

audio connections. See the table on the

right for jumper settings. The default

setting is Enabled.

Audio Enable/Disable

Jumper Settings

Pin# Deﬁ nition

1-2 Enabled

2-3 Disabled

SMBus to PCI Slots

Jumper Settings

JI

2

C1/ JI

2

C2 Setting

Pins 1-2 Enabled

Pins 2-3 Disabled

SMBus to PCI Slots

Jumpers JI

2

C1 and JI

2

C2 allow you to

connect the PCI slots to the System

Management Bus (I

2

C). The default

setting is disabled. See the table on the

right for jumper settings.

Watch Dog Enable/Disable

JWD controls the Watch Dog function.

Watch Dog is a system monitor that

can reboot the system when a soft-

ware application hangs. Jumping pins

1-2 (the default setting) will cause WD

to reset the system if an application

hangs. Jumping pins 2-3 will generate

a non-maskable interrupt signal for the

application that hangs. See the table on

the right for jumper settings. Watch Dog

must also be enabled in BIOS.

Note: When enabled, the user needs to

write their own application software in

order to disable the Watch Dog Timer.

Watch Dog

Jumper Settings (JWD)

Jumper Setting Deﬁ nition

Pins 1-2 Reset

Pins 2-3 NMI

Open Disabled

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 97 98

Komentáře k této Příručce

Žádné komentáře