Supermicro SYS-7046A-6 Uživatelský manuál stáhnout pdf (Strana 38)

5-6

SuperWorkstation 7046A-6 User's Manual

After removing the plastic cap, 1.

using your thumb and the index

ﬁ nger, hold the CPU at the north

and south center edges.

Align the CPU key (the semi-circle 2.

cutout) against the socket key (the

notch below the gold color dot on

the side of the socket).

Once both the CPU and the socket 3.

are aligned, carefully lower the

CPU straight down into the socket.

(Do not rub the CPU against the

surface of the socket or its pins to

avoid damaging the CPU or the

socket.)

With the CPU inside the socket, in-4.

spect the four corners of the CPU

to make sure that it is properly

installed.

Once the CPU is securely seated 5.

in the socket, lower the CPU load

plate to the socket.

Use your thumb to gently push the 6.

socket clip down to the clip lock.

CPU

CPU Socket

Load Plate

Warning: Please save the plastic cap. The motherboard must be shipped

with the plastic cap properly installed to protect the CPU socket pins.

Shipment without the plastic cap properly installed will cause damage

to the socket pins.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 97 98

Žádné komentáře

Supermicro SYS-7046A-6 Uživatelský manuál Strana 38