Supermicro SYS-7045A-WTB Datový list stáhnout pdf (Strana 122)

D-2

SuperWorkstation 7045A-WT User's Manual

Conﬁ guring Adaptec SATA RAID

1. Press the <Del> key during system bootup to enter the BIOS Setup Utility.

Note: If it is the ﬁ rst time powering on the system, we recommend you load the

Optimized Default Settings. If you have already done so, please skip to Step 3.

2. Use the arrow keys to select the "Exit" Settings. Once in the "Exit" settings,

Scroll down to select "Load Optimized Default Settings" and press the <Enter>

key. Select "OK" to conﬁ rm the selection. Press the <Enter> key to load the default

settings for the BIOS.

3. Use the arrow keys to select the "Main" section in BIOS.

4. Scroll down to "SATA Control Mode" and press the <Enter> key to select

"Enhanced"

5. Scroll down to "SATA RAID Enabled" and press <Enter>. Then, select "En-

abled."

6. Scroll down to "ICH RAID Codebase" and select "Adaptec". Then press <En-

ter>. (For ICH RAID Codebase: Change the setting from Intel to Adaptec.)

7. Go to "Exit". Select "Exit Saving Changes" from the "Exit" menu. Press the

<Enter> key to save the changes and exit the BIOS.

8. Once you've exited the BIOS Utility, the system will re-boot.

9. During the system boot-up, press the <Ctrl> and <A> keys simultaneously to run

the Adaptec RAID Conﬁ guration Utility when prompted by the following message:

Press <Ctrl> <A> for the Adaptec RAID Conﬁ guration Utility.

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 143 144

Žádné komentáře

Supermicro SYS-7045A-WTB Datový list Strana 122