Supermicro 1012C-MRF Uživatelský manuál stáhnout pdf (Strana 3)

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the A+ Server 1012C-MRF.

Installation and maintenance should be performed by experienced technicians

only.

The SuperServer SuperServer 1012C-MRF is a 1U rackmount server based on the

SC512F-350B server chassis and the Supermicro H8SCM-F serverboard.

Manual Organization

Chapter 1: Introduction

The ﬁ rst chapter provides a checklist of the main components included with the

server system and describes the main features of the Supermicro H8SCM-F

serverboard and the SC512F-350B chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the A+ Server 1012C-MRF into

a rack and check out the server conﬁ guration prior to powering up the system. If your

server was ordered without the processor and memory components, this chapter will

refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the A+

Server 1012C-MRF.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the H8SCM-F serverboard, including the

locations and functions of connectors, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconﬁ guring the

serverboard.

iii

Preface

1 2 3 4 5 6 7 8 ... 91 92

Žádné komentáře

Supermicro 1012C-MRF Uživatelský manuál Strana 3