Supermicro SuperWorkstation 5037A-i Uživatelský manuál stáhnout pdf (Strana 18)

3-2

SuperWorkstation 5037A-I User's Manual

3-3 Control Panel LEDs

The control panel located on the front of the SC732D4-903B chassis has three LEDs

that provide you with critical information related to different parts of the system.

This section explains what each LED indicates when illuminated and any corrective

action you may need to take.

Overheat/Fan Fail

When Flashing: This LED indicates a fan failure.

When Continuously On (not ashing): This LED indicates an overheat condi-

tion caused by cables obstructing the airow in the system or the ambient room

temperature being too warm.

Correcting an Overheat/Fan Fail Condition

1. Check the routing of the cables and move any cables that restrict airow.

2. Conrm that all fans are operating normally.

3. Verify that the heatsinks are installed properly.

4. If the chassis cover is not aligned correctly, the airow may be disrupted. This

leads to overheating. Conrm that the chassis cover is placed correctly.

5. This LED will remain active as long as the overheat condition exists.

HDD: Indicates IDE channel activity in the SAS/SATA drive, and/or DVD-ROM drive

activity when ashing.

NIC: Indicates network activity on GLAN when ashing.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 101 102

Žádné komentáře

Supermicro SuperWorkstation 5037A-i Uživatelský manuál Strana 18