Supermicro CSE-808T-1200B Uživatelský manuál stáhnout pdf (Strana 33)

5-11

Chapter 5: Chassis Setup and Maintenance

Checking Air Flow

Make sure there are no objects obstructing airow in and out of the server. In 1.

addition, if you are using a front bezel, make sure the bezel's lter is replaced

periodically.

Do not operate the server without drives or drive carriers in the drive bays. 2.

Use only recommended server parts.

Make sure no wires or foreign objects obstruct air ow through the chassis. 3.

Pull all excess cabling out of the airow path or use shorter cables.

The control panel LEDs inform you of system status. See “Chapter 3: System 4.

Interface” for details on the LEDs and the control panel buttons.

Installation Complete

In most cases, the chassis power supply and fans are pre-installed. If you need to

install them, continue to the Power Supply or Systems Fans sections of this chapter.

If the chassis will be installed into a rack, continue to the Rack Installation chapter

for rack installation instructions.

5-6 Checking the Air Flow

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 59 60

Žádné komentáře

Supermicro CSE-808T-1200B Uživatelský manuál Strana 33