Supermicro CSE-733T-450-B Uživatelský manuál stáhnout pdf (Strana 59)

D-1

Appendix D: SATA-733 Backplane Specications

Appendix D

SATA-733 Backplane Specications

A-1 Overview

The SATA backplane supports four SATA drives. The SATA drive's LED connec-

tor on the SATA backplane is JP26. There are also two power connectors on the

backplane, and both connectors should be connected. Do not cascade the SATA

backplane. Refer to the following table for jumper settings.

Introduction to the SATA-733 Backplane

The SATA-733 backplane has been designed to utilize the most up-to-date technol-

ogy available, providing your system with reliable, high-quality performance.

This manual reects SATA-733 Revision 3.00, the most current release available at

the time of publication. Always refer to the Supermicro Web site at www.supermicro.

com for the latest updates, compatible parts and supported congurations.

Important! Use extreme caution when working around the Serial

ATA (SATA) backplane. Do not touch the backplane with any metal

objects and make sure that no ribbon cables touch the backplane

or obstruct the airow holes in the SATA backplane. All SATA drive

carriers must remain in the drive bays to promoste proper airow.

1 2 ... 54 55 56 57 58 59 60 61 62

Žádné komentáře

Supermicro CSE-733T-450-B Uživatelský manuál Strana 59